ADTRAN 1000R Series - Manual (Page 299)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 299
show spanning-tree summary
Use the show spanning-tree summary command to display a brief summary of the spanning tree.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following is an example output using the show spanning-tree summary command:
>enable
#show spanning-tree summary
Spanning tree default pathcost method is short
Blocking Listening Learning Forwarding STP Active
-------------- -------------- -------------- --------------- ----------------
0 0 0 12 12