ADTRAN 1000R Series - Manual (Page 515)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 515
sntp wait-time <time>
Use the sntp wait-time command to set the time between updates from the time server.
Syntax Description
<time> Specifies time (in seconds) between updates. The range is from 10
to 4,294,967,294.
Default Values
By default, the wait time is set to 86400 seconds (1 day).
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R and Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example sets the SNTP wait time to two days:
(config)#sntp wait-time 172800