ADTRAN 1000R Series - Manual (Page 385)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 385
exception report [filename <filename>]
Use the exception report command to specify the output filename for the exception report.
Syntax Description
filename <filename> Optional. Specifies a filename for the exception report other than the default
filename.
Default Values
By default, the exception report filename is exception report-yyyyMMddHHmmss. (The
yyyyMMddHHmmss will be automatically replaced with the actual year, month, day, hour, minutes, and
seconds.)
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1 Command was introduced.
Usage Example
The following example specifies the output filename for an exception report:
(config)#exception report file-name example
(config)#exit
#exception report generate
Exception report generated.
#show flash
1744 startup-config
45676 example-20050708080537
#config t
(config)#no exception report file-name
(config)#exit
Appropriate commands must be issued to preserve configuration.
#exception report generate
Exception report generated.
#show flash
1744 startup-config
45676 example-20050708080537
45900 exception-report-20050708080552