ADTRAN 1000R Series - Manual (Page 1168)

Command Reference Guide VLAN Database Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1168
abort
Use the abort command to exit the VLAN Database without saving any changes made.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this setting.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
The abort command discards all configuration changes made since you entered the VLAN Database
Configuration (or since the last time you issued the apply command). The system then exits out of this
mode, returning to the enable (#) command prompt. See the command
apply on page 1169 for more
information.
Usage Examples
The following example exits the VLAN Database without saving the changes made:
(config)#vlan database
(vlan)#abort
Discarding all changes and exiting.
#