ADTRAN 1000R Series - Manual (Page 842)

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 842
username <username> password <password>
Configures the username and password of the peer to use for demand authentication.
Syntax Description
<username> Specifies a username by alphanumerical string up to 30 characters in length (the
username is case-sensitive).
<password> Specifies a password by alphanumerical string up to 30 characters in length (the
password is case-sensitive).
Default Values
By default, there is no established username and password.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1 Command was introduced.
Release 11.1 Command expanded to include the demand interface.
Functional Notes
PAP uses this entry to check received information from the peer. CHAP uses this entry to check the
received peer hostname and a common password.
Usage Examples
The following example creates a username of ADTRAN with password ADTRAN for the demand link
labeled 5:
(config)#interface demand 5
(config-demand 5)#username ADTRAN password ADTRAN