ADTRAN 1000R Series - Manual (Page 133)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 133
debug lldp [rx | tx] verbose
Use the debug lldp command to display debug output for all local loop demarkation point (LLDP) receive
and transmit packets. Use the no version of this command to disable it. Debug messages are displayed (real
time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.
Syntax Description
rx Shows information about received packets.
tx Shows information about transmitted packets.
verbose Shows detailed debugging information.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example activates all possible debug messages associated with LLDP operation:
>enable
#debug lldp rx
#debug lldp tx
#debug lldp verbose