Domain-name <domain – ADTRAN 1000R Series User Manual
Page 1333
Command Reference Guide
DHCP Pool Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1333
domain-name <domain>
Use the domain-name command to specify the domain name for the Dynamic Host Configuration
Protocol (DHCP) client. Use the no form of this command to remove the configured domain name.
Syntax Description
<name>
Identifies the DHCP client (e.g., adtran.com) using an alphanumeric string (up to
32 characters in length).
Default Values
By default, there are no specified domain names.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1
Command was introduced.
Usage Examples
The following example specifies a domain name of adtran.com:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#domain-name adtran.com