Dns-server <address1> <address2 – ADTRAN 1000R Series User Manual
Page 1251
Command Reference Guide
IKE Client Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1251
dns-server <address1> <address2>
Use the dns-server command to specify the DNS server address(es) to assign to a client.
Syntax Description
<address1>
Assigns the first DNS server address.
<address2>
Optional. Assigns the second DNS server address.
Default Values
By default, no DNS server address is defined.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 4.1
Command was introduced.
Usage Examples
The following example defines two DNS server addresses for this configuration pool:
(config)#crypto ike client configuration pool ConfigPool1
(config-ike-client-pool)#dns-server 172.1.17.1 172.1.17.3