ADTRAN 1000R Series User Manual
Page 76
Command Reference Guide
Enable Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
76
clear spanning-tree counters [interface <interface id>]
The clear spanning-tree counters command clears the following counts: BPDU transmit, BPDU receive,
and number of transitions to forwarding state.
Syntax Description
interface <interface id>
Optional. Specifies a single interface. Enter clear spanning-tree counters ? for a
complete list of interfaces.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 6.1
Command was introduced.
Usage Examples
The following example clears the spanning tree counters for Ethernet 0/10:
>enable
#clear spanning-tree counters interface eth 0/10