ADTRAN 1000R Series - Manual (Page 1355)

Command Reference Guide Route Map Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1355
match community <name> [exact-match]
Use the match community command to configure the route map to route traffic based on a specified
community. Use the no form of this command to discontinue matching.
Syntax Description
<name> Specifies the name of the community you want to match.
exact-match Optional. Specifies that the route map must match the community name
exactly.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series and
Total Access 900 Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example instructs the route map named MyMap to match the community named
MyCommunity:
(config)#route-map MyMap permit 100
(config-route-map)#match community MyCommunity