ADTRAN 1000R Series - Manual (Page 1258)

Command Reference Guide IKE Policy Attributes Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1258
hash [md5| sha]
Use the hash command to specify the hash algorithm to be used to authenticate the data transmitted over
the IKE SA.
Syntax Description
md5 Choose the MD5 hash algorithm.
sha Choose the SHA hash algorithm.
Default Values
By default, hash is set to sha.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 4.1 Command was introduced.
Usage Examples
The following example specifies md5 as the hash algorithm:
(config-ike)#attribute 10
(config-ike-attribute)#hash md5