Ppp chap hostname <hostname – ADTRAN 1000R Series User Manual
Page 1099
Command Reference Guide
PPP Interface Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1099
ppp chap hostname <hostname>
Use the ppp chap hostname command to configure an alternate hostname for CHAP PPP authentication.
Use the no form of this command to remove a configured hostname. For more information on PAP and
CHAP functionality, refer to the Technology Review section for the command ppp authentication [chap |
pap]
.
Syntax Description
<hostname>
Specifies a hostname using an alphanumeric string up to 80 characters in length.
Default Values
By default, there are no configured PPP CHAP hostnames.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example specifies a PPP CHAP hostname of my_host:
(config)#interface ppp 1
(config-ppp 1)#ppp chap hostname my_host