ADTRAN 1000R Series User Manual
Page 1229
Command Reference Guide
Certificate Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1229
crl
Use the crl command to restore a CRL. Use the no form of this command to remove the CRL for the
specific CA.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Command was introduced.
Functional Notes
The user typically does not enter this command. It is primarily used to restore CRLs from the startup
configuration when the product is powered up.
Usage Examples
The following example removes the CRL for the current CA:
(config)#crypto ca certificate chain MyProfile
(config-cert-chain)#no crl