ADTRAN 1000R Series - Manual (Page 789)

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 789
caller-number <CLID number>
Use the caller-number command to link calls to specific interfaces based on it’s caller ID (CLID) number.
Multiple caller ID numbers may be specified, allowing the interface to accept calls from different remote
resources. Use the no form of this command to restore the default values.
Syntax Description
<CLID number> Identifies the caller’s number to be linked to an interface. The CLID number is
limited to 20 digits.
Default Values
By default, no caller numbers are defined.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example links calls with a CLID number of 2565559911 to the demand interface 1:
(config)#interface demand 1
(config-demand 1)#caller-number 2565559911