Version [1 | 2 – ADTRAN 1000R Series User Manual
Page 1326
Command Reference Guide
Router (RIP) Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1326
version [1 | 2]
Use the version command to specify (globally) the Routing Information Protocol (RIP) version used on all
IP interfaces. This global configuration is overridden using the configuration commands ip rip send
version and ip rip receive version. Use the no form of this command to return to the default value.
Syntax Description
1
Specifies RIP version 1 be used globally.
2
Specifies RIP version 2 be used globally.
Default Values
By default, RIP is not enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example specifies RIP version 2 as the global RIP version:
(config)#router rip
(config-rip)#version 2