ADTRAN 1000R Series - Manual (Page 825)

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 825
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 9.1 Command was introduced.
Release 11.1 Command expanded to include the demand interface.
Usage Examples
The following example configures the demand interface to receive LLDP packets:
(config)#interface demand 1
(config-demand 1)#lldp receive