ADTRAN 1000R Series - Manual (Page 230)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 230
show ip ospf interface <interface>
Use the show ip ospf interface command to display open shortest path first (OSPF) information for a
specific interface.
Syntax Description
<interface> Optional. Displays the interface type. Type show ip ospf interface ? for a complete
list of applicable interfaces.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Release 9.1 Command was expanded to include HDLC and tunnel interfaces.
Usage Examples
The following example shows OSPF information for the PPP 1 interface.
>enable
#show ip ospf interface ppp 1