Accounting commands [<level> l <name> l default, Accounting commands [ <level> l <name> l default – ADTRAN 1000R Series User Manual
Page 533
Command Reference Guide
Line (Console) Interface Config Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
533
accounting commands [<level> l <name> l default]
Use the accounting commands command to assign AAA accounting methods to lines. You must first turn
AAA on for this command to become available.
Syntax Description
<level>
Specifies a command level (1 or 15).
<name>
Applies a named accounting method to this line.
default
Applies the default accounting method to a line.
Default Values
The default for this command is off.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example applies the default accounting method to line 1:
(config)#aaa on
(config)#line console 0
(config-con0)#accounting commands 1 default