ADTRAN 1000R Series User Manual
Page 272
Command Reference Guide
Enable Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
272
show qos [cos-map | dscp-cos | interface <interface id> | queuing]
Use the show qos command to display information regarding quality of service (QoS) and cost of service
(CoS) settings.
Syntax Description
cos-map
Displays the CoS priority-to-queue map. The map outlines which CoS priority is
associated with which queue.
dscp-cos
Displays the Differentiated Services Code Point (DSCP) to CoS map settings.
interface <interface id> Displays the QoS settings on a specific interface (Ethernet, Gigabit Ethernet, or
Port Channel).
queuing
Displays the type of queuing being used. If weighted round robin (WRR) queuing
is enabled, the command also displays the weight of each queue.
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 6.1
Command was introduced.
Release 7.1
Command was expanded to include the dscp-cos option.