Dial-backup force [backup | primary – ADTRAN 1000R Series User Manual
Page 733
Command Reference Guide
ATM Sub-Interface Config Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
733
dial-backup force [backup | primary]
Use the dial-backup force command to manually override the automatic dial-backup feature. This can be
used to force a link into backup to allow maintenance to be performed on the primary link without
disrupting data. Use the no form of this command to return to the normal dial-backup operation state.
Syntax Description
backup
Forces backup regardless of primary link state.
primary
Forces primary link regardless of its state.
Default Values
By default, this feature is disabled.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1
Command was introduced.
Release 8.1
ATM sub-interface was added.
Usage Examples
The following example configures the AOS to force this endpoint into dial-backup:
(config)#interface atm 1.1
(config-atm 1.1)#dial-backup force backup