ADTRAN 1000R Series - Manual (Page 967)

Command Reference Guide HDLC Command Set
61200510L1-35E Copyright © 2005 ADTRAN 967
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest Optional. Select message-digest authentication type.
null Optional. Select for no authentication to be used.
Default Values
By default, this is set to null (meaning no authentication is used).
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example specifies that no authentication will be used on the HDLC interface:
(config)#interface hdlc 1
(config-hdlc 1)#ip ospf authentication null