ADTRAN 1000R Series - Manual (Page 788)

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 788
called-number <DNIS number>
Use the called-number command to link calls to specific interfaces based on their dialed number
identification service (DNIS) numbers. Multiple called numbers may be specified for an interface. Use the
no form of this command to restore the default values.
Syntax Description
<DNIS number> Identifies the called number to be linked to an interface. The DNIS number is
limited to 20 digits.
Default Values
By default no called numbers are defined.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example links calls with a DNIS number of 2565558409 to the demand interface 1:
(config)#interface demand 1
(config-demand 1)#called-number 2565558409