ADTRAN 1000R Series - Manual (Page 477)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 477
modem countrycode [<countrycode>]
Use the modem countrycode command to specify the modem configuration for the applicable country.
Syntax Description
<countrycode> Specifies the modem configuration for the applicable country.
Default Values
By default, modem countrycode is set to USA/Canada.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 10.1 Command was introduced.
Functional Notes
The following country codes are available for modem configuration:
Algeria - Algeria Modem configuration
Argentina - Argentina Modem configuration
Australia - Australia Modem configuration
Austria - Austria Modem configuration
Bahrain - Bahrain Modem configuration
Belgium - Belgium Modem configuration
Bolivia - Bolivia Modem configuration
Brazil - Brazil Modem configuration
Chile - Chile Modem configuration
China - China Modem configuration
Colombia - Colombia Modem configuration
Costa_Rica - Costa_Rica Modem configuration
Cyprus - Cyprus Modem configuration
Czechoslovakia - Czechoslovakia Modem configuration
Denmark - Denmark Modem configuration
Ecuador - Ecuador Modem configuration
Egypt - Egypt Modem configuration
Finland - Finland Modem configuration
France - France Modem configuration
Germany - Germany Modem configuration
Greece - Greece Modem configuration