Port-auth re-authentication – ADTRAN 1000R Series User Manual
Page 483
Advertising
Command Reference Guide
Global Configuration Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
483
port-auth re-authentication
Use the port-auth re-authentication command to enable re-authentication.
Syntax Description
No subcommands necessary.
Default Values
By default, re-authentication is disabled.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1
Command was introduced.
Usage Examples
The following example enables re-authentication:
(config)#port-auth reauthentication
Advertising