ADTRAN 1000R Series - Manual (Page 540)

Command Reference Guide Line (Console) Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 540
login local-userlist
Use the login local-userlist command to enable security login for the terminal session requiring the
usernames and passwords configured using the username/password Global Configuration command. Use
the no form of this command to disable the login local-userlist feature.
Syntax Description
No subcommands.
Default Values
By default, there is no login password set for access to the unit.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example displays creating a local userlist and enabling the security login feature on the
CONSOLE port:
(config)#username my_user password my_password
(config)#line console 0
(config-con 0)#login local-userlist
When connecting to the unit, the following prompts are displayed:
User Access Login
Username: ADTRAN
Password:
Router#
All user properties assigned using the username/password command are valid when using
the login local-userlist command.