ADTRAN 1000R Series - Manual (Page 1173)

Command Reference Guide VLAN Database Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1173
vlan <vlan id> media [ethernet]
Use the vlan media command to set the VLAN media type. Use the no form of this command to reset to
the default.
Syntax Description
<vlan id> Specifies a valid VLAN interface ID (1 to 4094).
ethernet Sets the VLAN media type. The only media type currently supported is Ethernet.
Default Values
By default, vlan media is set to ethernet.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example sets the media type of VLAN 2 to ethernet:
(config)#vlan database
(vlan)#vlan 2 media ethernet