ADTRAN 1000R Series - Manual (Page 1210)

Command Reference Guide VLAN Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1210
mac-address <address>
Use the mac-address command to specify the Media Access Control (MAC) address of the VLAN
interface. Only the last three values of the MAC address can be modified. The first three values contain the
ADTRAN reserved number (00:0A:C8) by default. Use the no form of this command to return to the
default MAC address programmed by ADTRAN.
Syntax Description
<address> MAC address entered in a series of six dual-digit hexadecimal values separated
by colons (for example 00:0A:C8:5F:00:D2).
Default Values
A unique default MAC address is programmed in each unit shipped by ADTRAN.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example configures a MAC address of 00:0A:C8:5F:00:D2:
(config)#interface vlan 1
(config-interface-vlan 1)#mac-address 00:0A:C8:5F:00:D2