ADTRAN 1000R Series - Manual (Page 338)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 338
aaa group server [radius | tacacs+] <listname>
Use the aaa group server command to group pre-defined RADIUS and TACACS+ servers into named
lists. For more detailed information on AAA functionality, refer to the Technology Review section of the
command aaa on
on page 340 .
Syntax Description
radius Groups defined RADIUS servers.
tacacs+ Groups TACACS+ server.
<listname> Specifies the name of the list.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1 Command was introduced.
Release 11.1 TACACS+ server support was added.
Functional Notes
Use the radius-server command to specify RADIUS servers before adding them to a group. Likewise, use
the tacacs-server command to specify TACACS+ servers before adding them to a group. These
commands enter a mode for adding individual servers to the named group. Refer to
Radius Group
Command Set on page 1351 or TACACS+ Group Configuration Command Set on page 1363 for more
information.
The default group cannot be changed and includes all RADIUS servers in the order they were specified by
the radius-server commands. The same is true of TACACS+ servers specified by the tacacs-server
commands.