ADTRAN 1000R Series - Manual (Page 435)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 435
ip multicast-routing
Use the ip multicast-routing command to enable the multicast router process. The command does not
affect other multicast-related configurations. Use the no form of this command to disable. Disabling this
command prevents multicast forwarding but does not remove other multicast commands and processes.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 7.1 Command was introduced.
Usage Examples
The following example enables multicast functionality:
(config)#ip multicast-routing