ADTRAN 1000R Series - Manual (Page 1165)

Command Reference Guide VLAN Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1165
name <vlan name>
Use the name command to assign a name to the VLAN. Use the no form of this command to remove a
name given to a VLAN.
Syntax Description
<vlan name> Assigns a name string to the VLAN.
Default Values
By default, the name is set to VLANxxxx where xxxx represents four numeric digits (including leading
zeroes) equal to the VLAN ID number.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
The name is limited to 32 characters and must be unique throughout.
Usage Examples
The following example sets the name of VLAN 2 to Accounting:
(config)#vlan 2
(config-vlan 2)#name Accounting