ADTRAN 1000R Series - Manual (Page 921)

Command Reference Guide Frame Relay Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 921
spanning-tree bpduguard [enable | disable]
Use the spanning-tree bpduguard command to block BPDUs from being received on this interface. To
return to the default value, use the no form of this command.
Syntax Description
enable Enables the BPDU block.
disable Disables the BPDU block.
Default Values
By default, this command is set to disable.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example enables the BPDU guard on the interface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#spanning-tree bpduguard enable