ADTRAN 1000R Series - Manual (Page 835)

Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 835
ppp chap hostname <hostname>
Use the ppp chap hostname command to configure an alternate hostname for CHAP PPP authentication.
Use the no form of this command to remove a configured hostname. For more information on PAP and
CHAP functionality, refer to the Technology Review section for the command ppp authentication [chap |
eap | pap]
on page 831 .
Syntax Description
<hostname> Specifies a hostname using an alphanumeric string up to 80 characters in length.
Default Values
By default, there are no configured PPP CHAP hostnames.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1 Command was introduced.
Release 11.1 Command expanded to include the demand interface.
Usage Examples
The following example specifies a PPP CHAP hostname of my_host:
(config)#interface demand 1
(config-demand 1)#ppp chap hostname my_host