ADTRAN 1000R Series - Manual (Page 1364)

Command Reference Guide TACACS+ Group Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1364
server <host>
Use the server command to specify a particular TACACS+ server’s IP address or host name.
Syntax Description
<host> Specifies a TACACS+ server IP address.
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and Total Access
900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example specifies the IP address of the TACACS+ server:
(config)#aaa group server tacacs+ TEST_GROUP
(config-sg-tacacs+)#server 192.168.1.1
(config-sg-tacacs+)#