ADTRAN 1000R Series - Manual (Page 233)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 233
show ip policy-class <policyname>
Use the show ip policy-class command to display a list of currently configured access policies. Refer to ip
policy-class <policyname> max-sessions <number>
on page 437 for information on configuring access
policies.
Syntax Description
<policyname> Optional. Displays policy class information for a specific policy class.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following is a sample output from the show ip policy-class command:
>enable
#show ip policy-class
ip policy-class max-sessions 0
Policy-class "Trusted":
0 current sessions (6000 max)
Entry 1 - allow list MatchAll