Speed <rate – ADTRAN 1000R Series User Manual
Page 543
Command Reference Guide
Line (Console) Interface Config Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
543
speed <rate>
Use the speed command to specify the data rate for the
CONSOLE
port. This setting must match your
VT100 terminal emulator or emulator software. Use the no form of this command to restore the default
value.
Syntax Description
<rate>
Specifies rate of data transfer on the interface (2400; 4800; 9600; 19,200; 38,400;
57,600; or 115,200 bps).
Default Values
By default, the speed is set to 9600 bps.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1
Command was introduced.
Usage Examples
The following example configures the CONSOLE port for 19200 bps:
(config)#line console 0
(config-con 0)#speed 19200