Debug firewall – ADTRAN 1000R Series User Manual

Page 107

Advertising
background image

Command Reference Guide

Enable Mode Command Set

61200510L1-35E

Copyright © 2005 ADTRAN

107

debug firewall

Use the debug firewall command to activate debug messages associated with the AOS firewall operation.
Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.

Command History

Release 2.1

Command was introduced.

Functional Notes

The debug firewall command activates debug messages to provide real-time information about the AOS
stateful inspection firewall operation.

Usage Examples

The following example activates the debug messages for the AOS stateful inspection firewall:

>enable

#debug firewall

Advertising