ADTRAN 1000R Series - Manual (Page 198)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 198
show interfaces adsl <slot/port> information [atuc | atur | bit-allocation]
Use the show interfaces adsl command to display information related to the ADSL port.
Syntax Description
<slot/port> Specifies interface slot and port number.
atuc Shows ADSL interface remote information.
atur Shows ADSL local information.
bit-allocation Shows ADSL DMT bit-allocation table.
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example shows sample output for this command:
>enable
#show interfaces adsl 0/1 information
adsl 0/1 line information
adsl 0/1 Local Line Information
Vendor Id: 4144544E
Serial Number: EngBetaREVC01D
Firmware Version:
ADSL Capabilities G.DMT, G.LITE, ADSL2, ADSL2+
adsl 0/1 Remote Line Information
Vendor Id: 54535443
Serial Number: 00000000
Firmware Version: 1
ADSL Capabilities G.DMT, G.LITE, ADSL2, ADSL2+