Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 135)

Section
4A
4A-1
Primary 9/260 and 9/290 Components
This section discusses the primary components of the 9/260 and 9/290
enclosure:
Motherboard (9/260 and 9/290)
CPU Board (9/260 and 9/290)
Main Power Supply (PS1)
These modules are installed into the component enclosure. The component
enclosure also supports the digital or analog servo module(s), the remote
I/O port (9/290) and main power supply on the 9/260 and 9/290. The 9/260
and 9/290 component enclosure is shown in Figure 4A.1.
Figure 4A.1
Component Enclosure
19102
Remote I/O Port
(available on 9/290 only)
Motherboard
CPU Board
Analog Servo Module
8520-PS1
Power
Supply
Component Enclosure
4A.0
Section Overview