Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 545)

I/O Interface
Section 10A
10A-22
Figure 10A.16
dc Input Device Connection (E153, E154)
All six COM terminals are connected internally
Proximity
switch
LS1
PB2
Customer supplied
dc voltage
Terminal
Block
Label
COM COM COM
COM COM COM
A01 A02 A03 A04 A05 A06 A07 A08 A09 A10
B01 B02 B03 B04 B05 B06 B07 B08 B09 B10
11321-I
Output Device Connection
Table 10A.M lists the terminal of the digital I/O output terminal strip.
Each terminal may have an output device connected to it. Use the blank
space beside each terminal number to indicate any terminal assignments
that are made.
Table 10A.M
Digital I/O Output Terminals
Terminal No. Digital Output
Functions
Terminal No. Digital Output
Functions
A11 B11
A12 B12
A13 B13
A14 B14
A15 B15
A16 B16
The terminal assignments will have to correspond to the terminal
assignments of the digital I/O in the PAL I/O Assignment file. The I/O
assignment file will have to be edited if the terminal assignments do not
correspond.
Refer to the 9/Series CNC 9/230, 9/260, and 9/290 PAL Reference
Manual, publication 8520-4.3, for more information.