Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 380)

Section 7A
Connecting Components
7A-32
Table 7A.A
Cable and Connector List (continued)
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C16 All
9/Series
1746 I/O Rack 1746 I/O Power Cable Customer Power Supply Prepared by Customer
L1 — 120/240 V
L2 — V ac NEUTRAL
— PROTECTIVE EARTH
PWR OUT +24 V dc
PWR OUT COM
push latch up from underneath
to open the door
100/120 V
200/240 V
ATTENTION: Turn off power lines before
connecting power; failure to do so could
cause injury to personnel and/or equipment.
Voltage Selection Jumper
Power Connection
Connector On End of Cable Cable Type Connector On End of Cable Max. Cable Length
Supplied #14 AWG To customer power supply N/A
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C17 All
9/Series
Remote I/O Port 1770-CD PLC Scanner Purchased from
Allen-Bradley
Cat. no. 1770-CD