Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 386)

Section 7A
Connecting Components
7A-38
Table 7A.A
Cable and Connector List (continued)
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C23 9/260 and
9/290
8520 3--Axis Digital Servo Module
(CN09M)
Touch Probe Signal Cable Touch Probe Prepared by Customer
1
2
3
4
5
6
7
8
N.C.
N.C.
N.C.
N.C.
+5V dc touch probe power
Touch Probe signal input
Shield
Touch Probe signal ground
11218-I
Connector On End of Cable Cable Type Connector On End of Cable Max. Cable Length
Honda MR-8LF (has sockets)
8520-H8F
Belden 9502 Miscellaneous 3 m (10 ft)
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C24 9/260 and
9/290
Digital Servo Module (CN10M) Battery Backup Cable (dc) Lithium Battery Part of Battery
Assembly
C25 All 9/Series MTB Panel CN56F RS--232 Serial Interface
Cable
I/O Device Prepared by Customer
For cable wiring examples, refer to page 8-3.
Also refer to the manual included with the I/O device being connected.
Connector On End of Cable Cable Type Connector On End of Cable Max. Cable Length
25--pin D-shell (has pins)
8520-D25M
Belden 9508 Miscellaneous 4
4 The maximum length of this cable depends on the length of cable C07. The combined length of cables C07 and C25 may not exceed 15 m
(50 ft).