Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 64)

Section 2B
Mounting Dimensions
2B-7
Figure 2B.7
9/440 CNC and 1394 Drive System Module Dimensions
All Slots Accept M6, 1/4--20 Mtg. Screws
Depth = 279.4 (11.0)
50.0
(1.97)
50.0
(1.97)
25.4
(1.0)
91.0 (3.58)
150.0 (5.91)
Mounting Hole Detail
12.0 (0.47)
Dimensions are in millimeters and (inches)
343.0
(13.50)
400.0
(15.75)
28.5
(1.12)
JOG
ESC SEL
8.0 (0.31)
8.0 (0.31)
10.1 (0.40)
15.9 (0.63)
385.0 (fastener location)*
(15.16)
8.0 (0.32)
*Note Dimension shown is for mounting hardware
location and does not reflect the location of
the lower slot radius.