Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 532)

I/O Interface
Section 10A
10A-9
Pin Assignments for Use with Custom MTB Panels
The connector pins that are reserved for supplying power to the
push-button MTB panel I/O module are indicated. Any pins that are not
reserved can be assigned to custom MTB panel functions or an external I/O
device. Use the blank space beside each pin number to indicate any pin
assignments that are made. The pin assignments will have to correspond to
the pin assignments of the push-button MTB panel I/O module in the PAL
I/O Assignment file. The I/O assignment file will have to be edited if the
pin assignments do not correspond. Refer to the 9/Series CNC
9/230,9/260, and 9/290 PAL Reference Manual, publication 8520-4.3, for
more information.
Table 10A.D
Input Interface Cable Pin Assignments for Custom MTB Panels
(Connector CN51)
Pin No. MTB Input Functions Pin No. MTB Input Functions
1 2 +12V
3 4 +12V
5 6 +12V
7 8 +12V
9 10 +12V
11 12 +12V
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34
35 36
37 38
39 40
41 42
43 44
45 46
47 48
49 50
51 Power Off 52 Reserved for use with A-B MTB Panels
53 Power Common 54
55 Power On 56
57 E-Stop 58
59 E-Stop Common 60 Reset