Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 27)

Section
1B
1B-1
System Overview
This section provides an overview of the 9/230, 9/260, and 9/290 controls.
Typical system configurations and the external appearance of each
component of the control are provided in this section. Detailed
information on each component is provided in specific sections in
this manual.
For Information on: See
page:
System Configuration 1B-1
System Configuration for 9/230 System 1B-2
9/230 Component Enclosure 1B-6
9/260 and 9/290 Component Enclosure 1B-7
Operator Interface 1B-8
Drives Interface 1B-11
I/O Interface 1B-12
Communication Interface 1B-15
Offline Development System 1B-15
Adjustable Machine Parameters (AMP) 1B-15
Programmable Application Logic (PAL) 1B-15
Fiber Optic I/O Ring 1B-16
Figure 1B.2 to Figure 1B.3 show three typical configurations for the 9/230,
9/260, and 9/290 controls. Use these figures for an overview of the
inter-component connections you make during integration of the control.
1B.0
Section Overview
1B.1
System Configuration