Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 409)

Section 7A
Connecting Components
7A-61
Table 7A.A
Cable and Connector List (continued)
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C54 9/440 (all) 24V Logic Transformer
(customer supplied)
24V Logic Power 9/440 System Module
Power Terminal Block
Prepared by Customer
C54
High
Low
Customer supplied
24V logic transformer
dc+
INT
COL
W1(+) W2(--)
U W
V
PE
9/440 System Module
Power Terminal Block
Important: Make sure 24V logic power is applied
before allowing 3 phase power to come up. Logic
power must be applied to the system module first.
15 AMP
Customer Supplied
Fuses
Connector On End of Cable Cable Type Connector On End of Cable Max. Cable Length
Miscellaneous Belden 9409 Clamped by terminal screws Line Drop Limitation