Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 32)

Section 1B
System Overview
1B-6
The enclosures of the 9/230, shown in Figure 1B.4, supports the system
and the power supply. For dimensions refer to page 2B-1. For specific
information about the enclosure, refer to page 3A-1.
Figure 1B.4
9/230 Component Enclosures
9/230 Analog 9/230 Digital
Front View Side View with Cover Removed
and Power Supply Cut Away
Processor Board
Power Supply
Processor Board
Power Supply
Back
Plate
Power Supply Cut Away
to Show Connectors
The 9/230 analog control pictured above can also be purchased as a single
axis control. Pictured here is the 9/230 three axis control. Refer to page
3A-1 for more details. The single axis version is identical to the three axis
version with the exception of the single axis version having only one
closed loop axis connector. The single axis version is also always
equipped with a remote I/O port which can be purchased as an option on
the 3 axis system.
1B.2
9/230 Component Enclosure