Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 84)

Section
3A
3A-1
Primary 9/230 Components
This section discusses:
9/230 1 axis and 3 axis processor boards
main power supply (PS2A)
9/230 mounting
This section covers standard 9/230 CNCs as well as 9/230 CNCs
purchased as part of the T-Line-9 transfer line control. A portion of this
section is devoted to each of the following:
For Details on the Processor Board and Power Supply See Page:
Processor Board 3A-2
Connections on the Processor Board 3A-3
Reading LEDs 3A-5
Battery Backup 3A-6
Main Power Supply (PS2A) 3A-7
For Details on the Analog Servo Interface See Page:
Servo Axis Connectors on the Analog Processor Module 3A-8
Connecting Axes to the Analog Servo Interface 3A-9
Analog Servo Operation and Specifications 3A-12
Analog Servo Connectors and Pin Assignments 3A-13
Analog Servo Amplifiers 3A-16
Analog Servo Motors 3A-16
For Details on the 9/230 Digital Servo Interface See Page:
Servo Axis Connectors on the 9/230 Digital Processor Module 3A-24
Connecting Axes to the Digital Servo Interface 3A-24
Digital Servo Operation and Specifications 3A-26
Digital Servo Connectors and Pin Assignments 3A-27
Digital Servo Amplifiers 3A-30
Digital Servo Motors 3A-31
For Details on Testing and Connecting Feedback Devices See Page:
Using Test Points 3A-32
Encoder Termination Panel 3A-17
Feedback Devices 3A-18
Wiring an Incremental Feedback Device 3A-21
Wiring a Touch Probe to the Processor Module 3A-33
3A.0
Section Overview