Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 875)

Section 17
Installing 9/Series Hardware for CE Compliance
17-3
Filtering Power for a 9/440 System
To comply with CE guidelines you need to connect a power line filter to
cable C55. The type of filter you need is:
Product Part Number Manufacturer Phone Number
Power Line Filter MIF323-GS Roxburgh Electronics LTD
Foxhills Industrial Park
Scuntharpe
South Humberside, DN158Q5
United Kingdom
011-44-017-242-81770
Connect the power line filter to C55 as shown:
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C55 9/440 External 380/460V Three Phase Drive Power 9/440 System Module
Power Terminal Block
Prepared by Customer
DC+
INT
COL
W1
W2
U W V
PE
9/440 Power Strip
Noise suppressor
AC Bulletin 100--A30N x 3 (surge protector required) or
DC Bulletin 100--A30NZ x 3
Bussman FRS--R--20A (min) 600 V AC
FRS-R-30A (max) 600V AC
or equivalent (qty 3) Three-phase input
380-460V AC
Bulletin 100
Contactor Power
C 55
E-STOP Status Contactor
(customer supplied or internal 9/440 TB1 status)
LO
AD
LI
NE
Power
Line Filter
Connector On End of Cable Cable Type Connector On End of Cable Max. Cable Length
Miscellaneous See Local Codes
(12Awg max)
Clamped by terminal screws Line Drop Limitation