Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set - Manual (Page 369)

Section 7A
Connecting Components
7A-21
Table 7A.A
Cable and Connector List (continued)
Cable No. Control From Module and Connector Cable Name To Module and Connector Cat. No.
C06 9/260 and
9/290
Motherboard TB1 E-Stop Reset Cable MTB Panel BT20 Prepared by Customer
9/230 Processor Board TB1
9/440 (all) System Module TB1
C06
ON
COM
OFF
E-Stop
COM
RESET
B
T
20
E-Stop
Status
Contacts
Customer
E-Stop
String
Reset
Common
E-Stop
TB1
Important: If your control has terminal 8,
then connect it to chassis ground. If
terminal 8 is not present on your control,
then this type of grounding is not
necessary.
Connector On End of Cable Cable Type Connector On End of Cable Max. Cable Length
Miscellaneous Belden 9491 Miscellaneous Line Drop Limitation