Rockwell Automation 8520 9/Series CNC Integration Maintenance Manual Documentation Set User Manual
Page 62
Advertising
![background image](/manuals/580751/62/background.png)
Section 2B
Mounting Dimensions
2B-5
9/440 CNC and 1394 Drive
This section covers the dimensions and weight of the component for the
9/440. The dimensions outside of the brackets are given in millimeters and
inside the brackets in inches. For additional information on this
component refer to page 5A-1 or page 11A-1.
Figure 2B.5
Mounting Options for 9/440 or 1394 Drive
Through Enclosure Wall
Customer--supplied
enclosure
Inside Enclosure Using U Bracket
Customer--supplied
enclosure
Note:
This configuration does not require
a gasket between the AM50 or
AM75 and the enclosure
Advertising